RJS LASER LTD has a long history of high-quality machine service and repair. We have now reflected this in the most recent acquisition of our own two laser cutting machines. Both machines have undergone rigorous setup by our ex Trumpf® engineer. Our machines receive 24/7 onsite support and maintenance to ensure the best cut quality for our customers.

Trumpf L4030 – 4kw C02 Laser Cutting Machine

  • Z4000mm x 2000mm interchanging cutting bed.
  • ZCuts mild steel with a thickness of 20mm and below.
  • ZCuts stainless steel with a thickness of 10mm and below.
  • ZCuts Aluminium with a thickness of 10mm and below.
  • ZMinimum cutting thickness is 0.5mm in all materials.
  • ZCan cut with Oxygen, Nitrogen or air depending on material type.
  • Z+/- 0.2mm cutting tolerance on thinner materials, tolerance may increase slightly on plate 12mm thick and above but should not exceed +/-0.5mm.
  • ZPierceLine technology reduces spatter which in turn enhances the quality of lasered components.

Trumpf L3050 – 5kw C02 Laser Cutting Machine

  • Z3000mm x 1500mm interchanging cutting bed.
  • ZCuts mild steel with a thickness of 20mm and below.
  • ZCuts stainless steel with a thickness of 20mm and below.
  • ZCuts Aluminium with a thickness of 12mm and below.
  • ZMinimum cutting thickness is 0.5mm in all materials.
  • ZCan cut with Oxygen, Nitrogen or air depending on material type.
  • Z+/- 0.2mm cutting tolerance on thinner materials, tolerance may increase slightly on plate 12mm thick and above but should not exceed +/-0.5mm.

CONTACT US

Office

RJS LASER LTD, Whinfield Drive, Newton Aycliffe DL5 6AU, UK

ISO 9001:2015

Documentation

Signed copies of these documents are available on request.